These two boards were cut from a 2x10x8 board. I used pressure treated wood as it will last longer. In the end of the squared off end of the boards you can see two eye screws they are for holding the boards together while driving up on them. You put a nail, etc, through the eyes and boards will not be as likely to move when you pull your RV up on them. I used the 2x10 board so the tires will be sure to be completely on the board. It is not good to have a tire not completely on the board, also the angle on the end means the tire does not have to ride over the 90 degree corner of the non beveled end of a board.
No comments:
Post a Comment